THIS FONT IS RAPID

Project Info

J.W. Johnsons

Location: Hull

Surface: GRP - Fibreglass

Area: Van Lining

Firstly, we lined the walls of the van with marine grade plywood to Resinco standards and cut the drainage points as per the clients instruction.

All plywood surfaces were primed, followed by the application of one layer of 350g chopped strand mat which was allowed to cure. Three more coats were applied, followed by a final coat of gel/wax resin.

The same process was used for the floor but with the introduction of a silicone carbide anti-slip aggregate.

Loading...

Call us on +44 (0) 1482 506 228

TOP

Resin Flooring

Company

Get In Touch

Stay In Touch

+44 (0) 1482 506 228

+44 (0) 7711 313 407

+44 (0) 7763 629 291

info@resincoltd.com

©RESINCOLTD // Privacy Policy // Website by PLUNK

Project Info

J.W. Johnsons

Location: Hull

Surface: GRP - Fibreglass

Area: Van Lining

Firstly, we lined the walls of the van with marine grade plywood to Resinco standards and cut the drainage points as per the clients instruction.

All plywood surfaces were primed, followed by the application of one layer of 350g chopped strand mat which was allowed to cure. Three more coats were applied, followed by a final coat of gel/wax resin.

The same process was used for the floor but with the introduction of a silicone carbide anti-slip aggregate.

©RESINCOLTD // Privacy Policy
Website by
PLUNK